-
Valvoline 773780
- Unique Dispersive Polymer Technology (DPT), With Premium Group II Base Oil, Provides Advanced Soot Control, And Cold Start Protection
- Valve Train Wear Protection And Reduced Oil Filter Restriction At High Soot Levels
- High Temperature Deposit Control, Including Single And Two Piece Pistons, And Ring/Liner Wear Protection
- Higher TBN Level And TBN Retention For Long Life Performance, While Meeting All Chemical Limits
- Endorsed And Recommended By Cummins For Use In Dodge Ram Turbo Diesels
- No Supplier Warranty
$45.99 -
Valvoline 797578
- Keep The Engine Clean By Minimizing Deposit Formation
- Reduce Oil Consumption By Fighting Volatility And Oil Evaporation
- Resist Oil Thickening By Providing Enhanced Oxidation Control
- Improve Gas Mileage In The Lower Viscosity Grades By Reducing Friction
- No Supplier Warranty
$54.99 -
-
-
Valvoline 797974
- Keep The Engine Clean By Minimizing Deposit Formation
- Reduce Oil Consumption By Fighting Volatility And Oil Evaporation
- Resist Oil Thickening By Providing Enhanced Oxidation Control
- Improve Gas Mileage In The Lower Viscosity Grades (5W20, 5W30 And 10W30) By Reducing Friction
- Provide Thorough Anti-Wear Protection Exceeding Current U.S, Japanese And European Wear Tests For Gasoline And Gasoline Turbo-Charged Engines Where Each Grade Is Specified
- No Supplier Warranty
$64.99 -
Valvoline 797975
- Keep The Engine Clean By Minimizing Deposit Formation
- Reduce Oil Consumption By Fighting Volatility And Oil Evaporation
- Resist Oil Thickening By Providing Enhanced Oxidation Control
- Improve Gas Mileage In The Lower Viscosity Grades (5W20, 5W30 And 10W30) By Reducing Friction
- Provide Thorough Anti-Wear Protection Exceeding Current U.S, Japanese And European Wear Tests For Gasoline And Gasoline Turbo-Charged Engines Where Each Grade Is Specified
- No Supplier Warranty
$64.99 -
Valvoline 797976
- Special Seal Conditioners Rejuvenate Seals Within The Engine Block To Help Prevent Oil Leaks That Lead To Sludge And Deposits
- Antioxidant Additives Reduce Oil Viscosity Breakdown To Help Prevent Engine Clogging Sludge And Deposit Formation
- Detergents Chemically Bond With And Remove Existing Sludge And Deposits
- Additional Friction Reducing Additives Help Reduce Abrasion Within Engine
- Anti-Wear Agents Help Prevent Engine Damage
- No Supplier Warranty
$69.99 -
Valvoline 609506
- Special Seal Conditioners Rejuvenate Seals Within The Engine Block To Help Prevent Oil Leaks That Lead To Sludge And Deposits
- Antioxidant Additives Reduce Oil Viscosity Breakdown To Help Prevent Engine Clogging Sludge And Deposit Formation
- Detergents Chemically Bond With And Remove Existing Sludge And Deposits
- Additional Friction Reducing Additives Help Reduce Abrasion Within Engine
- Anti-Wear Agents Help Prevent Engine Damage
- No Supplier Warranty
$69.99 -
Valvoline 679082
- High Zinc/ Phosphorus Provides Extreme Wear Protection, Including Flat Tappet Applications
- Additional Friction Modifiers To Help Deliver Maximum Horsepower
- Enhanced Anti-Foam System Protects Engine During Extreme Stress
- Compatible With Gasoline Or Alcohol Fuels
- No Supplier Warranty
$89.99 -
-
Tiger Tool Commercial Tie Rod End Remover Kit, Includes 3 Removal Tools for 7/8″ – 14 (Class 6-8 Trucks), 3/4″ – 16 (Class 3-5), & M20 x 1.5 (European Trucks), 10310
About Item:
- EFFICIANT & SAFE: Experience unparalleled efficiency with the Tiger Tool Tie Rod End Remover, designed to safely “shock” loose tie rod ends without causing harm to threaded areas, rubber seals, or grease nipples, ensuring a damage-free removal process for heavy-duty maintenance.
- WIDE COMPATIBILITY: Commonly found on class 3-8 trucks and equipment. (For use with Ram 3500/5500, for use with Chevrolet 3500/5500, for use with Ford F-350/550, for use with Isuzu NPR, for use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, for use with European Trucks and Equipment etc.).
- HIGH QUALITY: Constructed with premium high-grade steel, the Tiger Tool Tie Rod End Remover stands as a testament to durability and strength. This tool is built to withstand the rigors of heavy-duty use, ensuring long-term reliability and consistent performance for mechanics and technicians.
- DURABILE & STRONG: Enhanced with a robust black oxide finish, each of the Tie Rod End Removers offer superior corrosion resistance, providing peace of mind and assurance of longevity, even in the most challenging working conditions and environments.
- NORTH AMERICAN CRAFTMANSHIP & INNOVATION: Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction.
$171.99 -
Pacbrake HP10352 ALPHA HD Rear Air Suspension Kit Compatible with Ford Ranger 2019-2023
About Item:
- Pacbrake Heavy Duty Double Convoluted Air Spring / Air Suspension Kits are the only air springs (or air helper springs) on the market with one piece aluminium end caps and 20 support wires giving you maximum strength and durability!
- Rated to 1,800 lbs
- Application: Compatible with Ford Ranger 2019-2023
- Application Notes: WILL NOT FIT: Tremor models
$190.06 -
Tiger Tool Pin and Bushing Adapter 15009, to be used with the Pin & Bushing Starter Kit for Heavy Duty Semi Trucks & Equipment, Adapter Tool for Removing Pins & Bushings
About Item:
- EFFICIENT & EASY TO USE: Utilize the Tiger Tool 15009 Adapter with your existing 15000 Pin & Bushing Starter Kit to seamlessly remove and install pins and bushings across a broad spectrum of heavy-duty truck manufacturers. This adapter allows you to perform maintenance while the entire suspension remains on the vehicle, offering unparalleled convenience and efficiency.
- WIDE COMPATIBILITY: For use with Automann M1214. For use with Dayton RB-295. For use with Flagg DT1473. For use with Gaff 11753. For use with Kenworth B65-1006, B65-1017. For use with Peterbilt B65-1017-001. This adapter ensures you can service a wide range of vehicles without needing to remove the suspension, saving significant time and effort. Note: The adapter requires the 15000 Pin and Bushing Starter Kit for operation.
- ROBUST CONSTRUCTION: Engineered with precision, the 15009 Adapter’s components are crafted from high-grade metals, ensuring both strength and durability. This robust construction guarantees the adapter’s longevity, providing a reliable solution for the rigorous demands of heavy-duty vehicle maintenance.
- CORROSION-RESISTANT FINISH: Featuring a protective black oxide coating, the 15009 Adapter is built to withstand corrosive environments, ensuring it remains in top condition through extensive use. This durable finish offers mechanics and technicians the confidence that their tool will last job after job.
- NORTH AMERICAN CRAFTMANSHIP & INNOVATION: Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction.
$199.99 -
12V HP325 Series Basic Air Compressor Air Compressor and Required Hardware Only
About Item:
Brand Pacbrake Voltage 12 Volts Recommended Uses For Product Drilling, Air Brushing, Spraying, Nailing Power Source Battery Powered Special Feature Portable - Get quick and effortless inflation power at your fingertips.
- Pacbrake’s HP325 series Pacbrake air compressors have a 33% duty cycle (20 minutes @ 100 psi), deliver 1/4 horsepower and are offered in both 12 and 24 VDC.
- A copper wire wound permanent magnet motor.
- Oil-less design and sealed bearings.
- Cast aluminum cylinder head and hard anodized aluminum sleeve.
$217.06 -
Tiger Tool Brake Anchor Pin Press Made for Commercial Heavy Duty Trucks, Break Anchor Pin Press for Semi Trucks, Works on Class 6 – 8 Transportation Trucks & Equipment, 16002
About Item:
Brand Tiger Tool Item dimensions L x W x H 4.6 x 2.6 x 5.6 inches Color Factory Style Modern Item Weight 0.2 Ounces Tensile Strength 10 Tons UPC 683552160028 Manufacturer Tiger Tool - EFFICIENT MAINTENANCE: The Tiger Tool 16002 makes removing brake anchor pins and bushings a breeze on nearly all 16-1/2” S-Cam trailer and tractor “Q” brake systems, significantly reducing service time and ensuring a safe, damage-free process.
- WIDE COMPATIBILITY: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.). In the event you are servicing a stamped spider, a punch and chisel may be required to remove the bushing.
- ROBUST CONSTRUCTION & DESIGN: Featuring a sturdy C-frame with a 10-ton capacity, the Brake Anchor Pin Press is built from high-grade steel, ensuring both strength and longevity. Its compact design allows for efficient service directly on the vehicle, bypassing the need to remove the hub and dust shield, saving time, and avoiding the hassle of dealing with rusted or broken dust shield bolts.
- SIMPLE & ACCESSIBLE OPERATION: No need for specialized tools – the 16002 operates with a standard 7/8” hex drive and includes a bushing removal adapter. This design simplicity ensures that removing both anchor pins and bushings is straightforward, making it accessible to all technicians.
- NORTH AMERICAN CRAFTMANSHIP & INNOVATION: Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction.
$319.99
SHOP THE SALE: TAKE UP TO 10% OFF RV Soft Starter, Exhaust, Winches & MORE