-
10Lb Bottle, Lightning 500 Valve, 4AN Nipple (6.89 Dia. X 20.19 Tall)
About item:
NX nitrous bottles feature a tough and attractive powder-coated finish. Includes the billet aluminum Lightning 500 bottle valve.
The NX Lightning 500 bottle valve flows great, weighs less, and looks amazing. The new and improved Lightning 500 bottle valve features a huge 5/8 siphon tube, a 500 thousandths high lift stem assembly, and a 45-degree outlet for the ultimate in flow and horsepower production. The Lightning 500 valve includes dual gauge ports and weighs 1/2 pound less than our old style chrome-plated brass valve. The Lightning 500 comes standard in many NX nitrous systems and is also available separately as an upgrade for your existing bottle.
The lightning 500 bottle valve includes a 4AN bottle nipple, other bottle nipple sizes may be purchased separately.
Bottle Dimensions:
- 6.89 Dia. X 20.19 Tall
$305.39 -
Maximizer 6 Progressive Controller
About item:
- The Maximizer 6 features many safety features that help you push your tune-up further while protecting your engine from damage.
The Maximizer 6 progressive nitrous controller operates up to four separate stages of nitrous based on either time, RPM, MPH, throttle percentage or boost pressure. Whether your engine is naturally aspirated or forced induction, gasoline or diesel, the Maximizer 6 is the first choice.
Safety Features
The Max 6 monitors throttle percentage, engine rpms, nitrous PSI, boost or pan vacuum as well as 3 other user defined sensors to ensure that your engine is in the correct state to accept nitrous. If the Max 6 detects any condition that is outside the safe range, the Max 6 will shut down or pull back nitrous flow to protect your engine from any damage.
$617.27 - The Maximizer 6 features many safety features that help you push your tune-up further while protecting your engine from damage.
-
Maximizer EZ Progressive Nitrous Controller
About item:
The NX Maximizer EZ Progressive Nitrous Controller is easy to install and easy to tune making it easy to go fast.
The Max EZ was designed to replace the relay in your NX nitrous system so installation time is less than 30 seconds! Simply unplug your existing NX relay and plug the proprietary Max EZ male plug into your NX relay harness (if your nitrous system does not have a standard NX relay harness, use the included NX relay harness to complete the installation).
The Max EZ pulses your nitrous and fuel solenoids to smoothly ramp in your nitrous power resulting in increased traction and less strain on your vehicles drivetrain. The progression ramp automatically starts at 20% and ends at 100% when you push the accelerator pedal to W.O.T. (Wide Open Throttle). Ramp time is adjustable from 0 to 4.5 seconds via a simple turn screw. We recommend selecting the lowest ramp time possible without introducing tire spin. If tire spin is noticed, simply increase the ramp time to slow down the ramp to full power.
The Max EZ is capable of powering nitrous and fuel solenoids with a total amp draw up to 40 amps maximum making it the perfect choice for most plate and single nozzle nitrous systems. Consult your nitrous system manufacturer for your solenoids amp draw.
- Large-frame winch architecture mounts feet forward
- Waterproof contactor control for the ultimate in reliable electronics
- Powerful, efficient series-wound motor
- Durable, smooth three-stage planetary gear train
- Best-in-class cone brake
$159.57 -
Nitrous Express 16008 Maximizer 5 Progressive Controller Incl. Internal Drivers for Stage One and Stage Two Operates Up to 4 Separate Stages of Nitrous Maximizer 5 Progressive Controller
About item:
Consistency is key when going fast and the Nitrous Express Pressure Gauge makes sure you are doing just that!
This high accuracy liquid filled 2-1/16″ nitrous pressure gauge reads from 0 to 1500 psi.
Includes:
- High accuracy 2-1/16″ nitrous pressure gauge
- Billet aluminum 4AN manifold with two 1/8 NPT ports
- 1/8 NPT Plug
$617.27 -
Nitrous Purge Valve With Poly Line (4AN)
About item:
The NX Purge System is designed to purge the air from your nitrous lines to allow immediate activation of your Nitrous system. This System includes a Lightning solenoid, push button for activation, and a vent tube to direct the purged nitrous out of the solenoid. Also included is a 4AN manifold to run inline with your nitrous feedline. This allows you to purge the nitrous system, even when you do not have a purge port built into your solenoids. The Purge system can also be used to lower the bottle pressure for spot on nitrous performance every time you activate the system.
Purge System includes:
- Purge Solenoid
- 4AN Adapter Fitting
- Push button activation
- 1/8 to 1/8 NPT Fitting
- 1/8 NPT to poly line adapter
- 36 inches of 1/8 poly line
$187.74
SHOP THE SALE: TAKE UP TO 10% OFF RV Soft Starter, Exhaust, Winches & MORE