-
Mile Marker ATV UTV Winch Accessory Kit – 19-00105,8
About item:
The Mile Marker ATV/UTV Recovery Kit includes everything that you need to push your trail blazing ATV or UTV to the limits: Two 5/8″ powder-coated shackles, two 1″ X 8′ recovery straps, a snatch block, and a pair of recovery gloves are all conveniently packaged in a durable carrying case that can be strapped and mounted virtually anywhere on your rig.
ATV/UTV ACCESSORY KIT INCLUDES:
• Durable Carrying Case
• 8K Snatch Block
• Two 5/8″ Powder Coated Shackles
• Two 1″x 8′ Recovery Strap
• 1 Pair of Gloves$79.99 -
Mile Marker Rhino Pull 1000TM Battery
About item:
Battery Installation and Unloading
- During the installation, please confirm that the power switch is in the “OFF/O” position.
- The battery release button must be at the top, align the contact point of the battery against the corresponding contact point on the battery slot, slide the battery in, and gently press until the battery is locked in place.
- When removing the battery from Rhino Pull™ portable winch, confirm the power switch is in the “OFF/O” position.
- Press down the battery release button and remove the battery.
$99.99 -
MILEMARKER Mile Marker 104 Premium Manual Hub Set
About item:
Mile Marker Custom Shop products will add 4-6 weeks to production time.
Replaces the original equipment manual or automatic Hubs. Please refer to the application guide to see if your vehicle requires a conversion kit.
- Fit type: Vehicle Specific.Fit Type: Vehicle Specific
- Axle Outside Diameter:1.250 inch
$134.99 -
Mile Marker 435 Premium Manual Hub Set
About item:
Replaces original equipment manual or automatic Hubs.
- Heavy duty dial for secure engagement/disengagement
- Chrome construction with heavy duty spring for heavy duty strength and corrosion resistance
- For 28 spine axles
- Includes 2 hubs (pair), springs, clips and wrench
$169.99 -
Mile Marker 549 Fits Ford F-550 Super Duty
About item:
Mile Marker Custom Shop products will add 4-6 weeks to production time.
Replaces the original equipment manual or automatic Hubs.
- All metal cap and dial for enhanced durability
- Marine grade stainless steel hardware
- Waterproof and corrosion resistant
- Easy to install
- Limited lifetime
FITS 2005 & NEWER FORD SUPER DUTY TRUCKS
$185.00 -
Pacbrake HP10352 ALPHA HD Rear Air Suspension Kit Compatible with Ford Ranger 2019-2023
About Item:
- Pacbrake Heavy Duty Double Convoluted Air Spring / Air Suspension Kits are the only air springs (or air helper springs) on the market with one piece aluminium end caps and 20 support wires giving you maximum strength and durability!
- Rated to 1,800 lbs
- Application: Compatible with Ford Ranger 2019-2023
- Application Notes: WILL NOT FIT: Tremor models
$190.06 -
12V HP325 Series Basic Air Compressor Air Compressor and Required Hardware Only
About Item:
Brand Pacbrake Voltage 12 Volts Recommended Uses For Product Drilling, Air Brushing, Spraying, Nailing Power Source Battery Powered Special Feature Portable - Get quick and effortless inflation power at your fingertips.
- Pacbrake’s HP325 series Pacbrake air compressors have a 33% duty cycle (20 minutes @ 100 psi), deliver 1/4 horsepower and are offered in both 12 and 24 VDC.
- A copper wire wound permanent magnet motor.
- Oil-less design and sealed bearings.
- Cast aluminum cylinder head and hard anodized aluminum sleeve.
$217.06 -
Mile Marker PE2500 ATV/UTV/Side-by-Side Electric Winch with Steel Cable – 2500 lb. Capacity, Silver (77-50105BW)
About item:
At only 18.5 pounds, the Mile Marker PE2500 winch for ATVs boasts top-of-the-line recovery speeds and an impressive 2500 pounds of pulling capacity. Fully-sealed, submersible, water, mud, and snow proof, the PE2500 includes a 3/16” x 42’ Steel Cable, a roller fairlead, a hook, corrosive-resistant, and a handheld remote control and a handle bar mounted remote control for versatility and convenience. With the all-metal, 2-stage planetary gear train, 200-amp solenoid, high-output, permanent magnet motor and marine grade remote control connectors, the PE2500 provides the durability and reliability you can depend on in the most extreme situations.
Main Features:
• 2.4 HP Permanent Magnet Motor
• All Metal Planetary Gearing
• Submersible, 200 Amp Solenoid
• Automatic Load Holding Brake
• Center Focused Drum
• Fast Line Speeds
• 42′ of Steel Cable or 50′ Synthetic Rope
• Roller Fairlead or Aluminum Hawse
• Waterproof
• Handheld and Handlebar Controls$299.99 -
Pacbrake HP10158 ALPHA HD Rear Air Suspension Kit Compatible with Toyota Tundra 2002-2006
About Item:
Brand Pacbrake Auto Part Position Rear Material Alloy Steel, Aluminum Included Components all components required for install Manufacturer Pacbrake - Designed for durability and performance, the ALPHA HDTM Series offers a Better Built, Better Priced solution for heavy-duty applications
- Up to 5,000 lbs of load leveling capacity
- Application: 2001-2006 Toyota Tundra (2WD/4WD)
- Application Notes: This kits is for trucks in which the upper jounce bumper pad protrudes 1″ below the frame. All Toyota Kits require a minimum of 5” between the tire and the frame and will only fit with stock wheels and tires.
$341.09 -
Pacbrake HP10387 ALPHA HD Air Spring Suspension Kit Compatible with Ford F-250/F-350 (2WD/4WD) 2011-2016
About Item:
- Designed for durability and performance, the ALPHA HD Series offers a Better Built, Better Priced solution for heavy-duty applications
- Up to 5,000 lbs of load leveling capacity
- Application: COMPATIBLE WITH FORD F250/F350 (2WD/4WD) 2011-16 & F450 (2WD/4WD) 2011-14
- Application Notes: Fits models equipped with or without 5th Wheel Hitch
$390.56