-
SMARTY 98.5+ DODGE/RAM CUMMINS TOUCH TUNER – TOUCH
About this item
- Two devices: Smarty Touch Display and Smarty Touch Controller each with its own CPU. The Display for the graphics user interface and the controller for communicating with the ECM.
- Fastest display start up in the industry. Just four seconds!
- Fastest PID refresh speed in the industry.
-
Brand Smarty Part Number TOUCH UPC SMAS2G Product Code Programmers & Tuners
$865.00 -
Pacbrake HP20327-QM Dual Channel (2nd Generation) Wirelesss Air Spring Controls (Quick Mount)
About Item:
- Dual Path Control – adjust your air springs independantly to adjust for uneven loads.
- 3x Signal Strength – gone are any frustrations associated with connecting phone and controller.
- Waterproof and debris resistant – Demand a Pacbrake IP67 rated controller.
- Quick Mount Kit – comes with Quick Mount bracket for effortless bolt-on installation.
- Military grade solenoids – designed to withstand extreme cold, heat, moisture or salt spray.
- Ultra Easy Connections– Pre-installed push-to-connect air fittings and pre-assembled wiring connectors reduces installation time to under an hour!
- Works in the Backcountry – strong bluetooth connection; does not require cellular service to operate.
$789.99 -
Mads Smarty SSR Tuner – SSR59
About this item
Product Name: Mads Smarty SSR Tuner
Manufacturer: Mads Smarty
Manufacturer Part #: SSR
Thoroughbred Diesel Part #: SMASSR59
Fitment Notes: Mads Smarty SSR Tuner – 03-07 Dodge Cummins 5.9L$735.00 -
SMARTY S67 TUNER BY MADS ELECTRONICS 07.5-12 DODGE 6.7L CUMMINS 5.0
About this item
Product Name: Mads SMARTY S67 TUNER
Manufacturer: Mads Smarty
Manufacturer Part #: S-67
Fitment Notes: SMARTY S67 TUNER BY MADS ELECTRONICS 07.5-12 DODGE 6.7L CUMMINS 5.0$685.00 -
Mads Smarty POD Tuner – S-06
About this item
- CaTCHER software’s inside
- Ten different performance levels
- Fastest download in the industry, up to three times faster than the competition, a typical ECM update takes about 3.5 to 5 minutes
- ABS tire height updates in just few seconds
- Not traceable in the stock setting. Smarty leaves no footprint.
- Manual High Idle is enabled in all softwares
- Reads Diagnostic Trouble Codes in plain text
- No tools required, no fuses to pull
- USB built in for simple updates
- Free internet updates
- Most complete keyboard in the industry
- Reliable, it works off your OEM hardware
- Programmable Speed Limiter from 25 to 250 mph
- Programmable parameters for fine tuning
- Power on Demand
-
Brand Smarty Part Number S-06
$685.00 -
Mads Smarty Tuner – S-03
About this item
- CaTCHER software modules.
- Ten different performance levels.
- Fastest download in the industry, a typical ECM update takes just two minutes.
- ABS tire height updates in just seconds.
- Not traceable by the dealer in the stock setting. Smarty leaves no footprint.
- Cold weather 3 Cylinder High Idle is enabled in all software.
-
Brand Smarty Part Number S-03
$645.00 -
Smarty JR-67 for Dodge Cummins Turbodiesel 6.7L (2007 – 2012)
About this item
Product Name: Smarty JR for Dodge Cummins
Manufacturer: Mads Smarty
Manufacturer Part #: SJ-67
Fitment Notes: Smarty JR-67 for Dodge Cummins Turbodiesel 6.7L (2007 – 2012)$495.00 -
Pacbrake HP20472-QM Single Channel Wireless (2nd Generation) w/SD Compressor (Quick Mount)
About Item:
Brand Pacbrake Voltage 12 Volts (DC) Recommended Uses For Product Vehicle Air Spring Control, Tire Inflation Power Source Corded Electric Special Feature Heavy Duty - Single Path Control – left and right air springs are inflated/deflated equally.
- 3x Signal Strength – gone are any frustrations associated with connecting phone and controller.
- Waterproof and debris resistant compressor and controller!
- Military grade solenoids – designed to withstand extreme cold, heat, moisture or salt spray.
- Ultra Easy Connections– Pre-installed push-to-connect air fittings and pre-assembled wiring connectors reduces installation time to under an hour!
- Works in the Backcountry – strong bluetooth connection; does not require cellular service to operate.
- Quick Mount Kit – comes with Quick Mount bracket for effortless bolt-on installatio
$459.99 -
Pacbrake HP10171 ALPHA HD Rear Air Suspension Compatible with Silverado/Sierra 2500/3500 2011-2019
About Item:
- Pacbrake Heavy Duty Double Convoluted Air Spring / Air Suspension Kits are the only air springs (or air helper springs) on the market with one piece aluminium end caps and 20 support wires giving you maximum strength and durability!
- Each Pacbrake Double Convoluted Air Spring / Air Suspension Kit is equipped with corrosion resistant roll plates, precision laser cut powder coated steel brackets, grade 5 plated hardware, airline and all accessories required for the perfect bolt on install.
- Pacbrake Air Springs come with a Lifetime Warranty.
- Rated to 5,000 lbs
- Compatible with Chevrolet Silverado/GMC Sierra 2500/3500 2011-2019 (2WD/4WD)
$422.78 -
Electric Fuel Pump Gas for Ford for F150 4.2L/4.6L 1997-2003 & 5.4L 1999-2003 for F250 4.6L/5.4L 1997-1999 Truck Without Pressure Sensor HP10089
About Item:
- Fitment:for Ford,for F150 4.2 L/4.6 L 1997-2003 & 5.4 L 1999-2003,for F250 4.6 L/5.4 L 1997-1999
- Assembly: Fuel Pump with Module
- Part Number:HP10089
- Operation:Electric
- Pressure Sensor Included:Without Pressure Sensor
- Part Name:Fuel Pump
- Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent
$409.88 -
Pacbrake HP10387 ALPHA HD Air Spring Suspension Kit Compatible with Ford F-250/F-350 (2WD/4WD) 2011-2016
About Item:
- Designed for durability and performance, the ALPHA HD Series offers a Better Built, Better Priced solution for heavy-duty applications
- Up to 5,000 lbs of load leveling capacity
- Application: COMPATIBLE WITH FORD F250/F350 (2WD/4WD) 2011-16 & F450 (2WD/4WD) 2011-14
- Application Notes: Fits models equipped with or without 5th Wheel Hitch
$390.56 -
McGard 65515BK Black Spline Drive 5 Lug Wheel Installation Kit (M14 x 1.5), 16 Lug Nuts / 4 Locks / 1 Key / 1 Install Tool
About Item:
Material Steel Fastener Type Wheel Thread Size M14 x 1.5 Exterior Finish Painted Color Black - Seat Style Cone Seat Nut; Thread Size M14 x 1.5; Overall Length 1.648; Hex Size 22mm; Includes 16 Lug Nuts-1 Installation Tool-4 Wheel Locks-1 Key & 1 Key Pouch
- SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts; In addition they are 30% lighter in weight. Available in a variety of colors and styles. One is sure to match your wheel style or color. The black, gold or chrome plating on all of our lug nuts are guaranteed for life not to chip, peel or rust…ever! For aluminum wheels only. Box Kits include SplineDrive lug nuts, installation tool, tool storage pouch and chrome sleeve valve stems. Chrome, gold and black kits include 4 wheel locks, wheel lock key tool and I.D. card. Colored cap kits do not include wheel locks
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
- Please note that wheel locks and lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts
- Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by the factory or dealership.
$377.44 -
Pacbrake HP10158 ALPHA HD Rear Air Suspension Kit Compatible with Toyota Tundra 2002-2006
About Item:
Brand Pacbrake Auto Part Position Rear Material Alloy Steel, Aluminum Included Components all components required for install Manufacturer Pacbrake - Designed for durability and performance, the ALPHA HDTM Series offers a Better Built, Better Priced solution for heavy-duty applications
- Up to 5,000 lbs of load leveling capacity
- Application: 2001-2006 Toyota Tundra (2WD/4WD)
- Application Notes: This kits is for trucks in which the upper jounce bumper pad protrudes 1″ below the frame. All Toyota Kits require a minimum of 5” between the tire and the frame and will only fit with stock wheels and tires.
$341.09 -
McGard 84640 Black Cone Seat Wheel Installation Kit for 6 Lug Vehicles (M14 x 1.5 Thread Size)
About Item:
Material Steel Fastener Type Wheel Thread Size M14 x 1.5 Exterior Finish Machined Color Black - Cone Seat Nut; Thread Size M14 x 1.5; Overall Length 1.945; Hex Size 22mm; Includes 20 Lug Nuts-4 Wheel Locks-1 Key & 1 Key Pouch
- Wheel locks and Cone Seat lug nuts install Kit includes Lug Nuts, Wheel Locks , 1 unique Key and 1 Key Pouch. For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
- Please note that Wheel locks and lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks and lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts
- Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by the factory or dealership.
$252.77 -
McGard 84640 Black Cone Seat Wheel Installation Kit for 6 Lug Vehicles (M14 x 1.5 Thread Size)
About Item:
Material Steel Fastener Type Wheel Thread Size M14 x 1.5 Exterior Finish Machined Color Black - Cone Seat Nut; Thread Size M14 x 1.5; Overall Length 1.945; Hex Size 22mm; Includes 20 Lug Nuts-4 Wheel Locks-1 Key & 1 Key Pouch
- Wheel locks and Cone Seat lug nuts install Kit includes Lug Nuts, Wheel Locks , 1 unique Key and 1 Key Pouch. For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
- Please note that Wheel locks and lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks and lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts
- Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by the factory or dealership.
$252.77
SHOP THE SALE: TAKE UP TO 10% OFF RV Soft Starter, Exhaust, Winches & MORE