-
MagnaFlow Street Series Cat-Back Performance Exhaust System
SPECIFICATIONS
- Type
- Cat-Back
- Series
- Street
- Main Piping Diameter
- 3″
- Exit Style
- Dual Split Rear
- Inlet Connection Type
- Clamp-On
- Muffler Quantity
- 1
- Muffler Type
- Straight-Through
- Muffler Material
- Stainless Steel
$1,207.00 -
MagnaFlow Ford Expedition Street Series Cat-Back Performance Exhaust System
SPECIFICATIONS
- Type
- Cat-Back
- Series
- Street
- Main Piping Diameter
- 3″
- Exit Style
- Single Passenger Side Rear
- Inlet Connection Type
- Bolt-On
- Muffler Quantity
- 1
- Muffler Type
- Straight-Through
- Muffler Material
- Stainless Steel
$976.00 -
MagnaFlow Ford Focus Street Series Cat-Back Performance Exhaust System
SPECIFICATIONS
- Type
- Cat-Back
- Series
- Street
- Main Piping Diameter
- 2.5″
- Exit Style
- Dual Center Rear
- Inlet Connection Type
- Bolt-On
- Muffler Quantity
- 2
- Muffler Type
- Straight-Through
- Muffler Material
- Stainless Steel
$910.00 -
SMARTY 98.5+ DODGE/RAM CUMMINS TOUCH TUNER – TOUCH
About this item
- Two devices: Smarty Touch Display and Smarty Touch Controller each with its own CPU. The Display for the graphics user interface and the controller for communicating with the ECM.
- Fastest display start up in the industry. Just four seconds!
- Fastest PID refresh speed in the industry.
-
Brand Smarty Part Number TOUCH UPC SMAS2G Product Code Programmers & Tuners
$865.00 -
MagnaFlow JK Jeep Wrangler Street Series Axle-Back Performance Exhaust System
SPECIFICATIONS
- Type
- Axle-Back
- Series
- Street
- Main Piping Diameter
- 2.5″
- Exit Style
- Dual Split Rear
- Inlet Connection Type
- Clamp-On
- Muffler Quantity
- 1
- Muffler Type
- Straight-Through
- Muffler Material
- Stainless Steel
$775.00 -
Mads Smarty SSR Tuner – SSR59
About this item
Product Name: Mads Smarty SSR Tuner
Manufacturer: Mads Smarty
Manufacturer Part #: SSR
Thoroughbred Diesel Part #: SMASSR59
Fitment Notes: Mads Smarty SSR Tuner – 03-07 Dodge Cummins 5.9L$735.00 -
SMARTY S67 TUNER BY MADS ELECTRONICS 07.5-12 DODGE 6.7L CUMMINS 5.0
About this item
Product Name: Mads SMARTY S67 TUNER
Manufacturer: Mads Smarty
Manufacturer Part #: S-67
Fitment Notes: SMARTY S67 TUNER BY MADS ELECTRONICS 07.5-12 DODGE 6.7L CUMMINS 5.0$685.00 -
Mads Smarty POD Tuner – S-06
About this item
- CaTCHER software’s inside
- Ten different performance levels
- Fastest download in the industry, up to three times faster than the competition, a typical ECM update takes about 3.5 to 5 minutes
- ABS tire height updates in just few seconds
- Not traceable in the stock setting. Smarty leaves no footprint.
- Manual High Idle is enabled in all softwares
- Reads Diagnostic Trouble Codes in plain text
- No tools required, no fuses to pull
- USB built in for simple updates
- Free internet updates
- Most complete keyboard in the industry
- Reliable, it works off your OEM hardware
- Programmable Speed Limiter from 25 to 250 mph
- Programmable parameters for fine tuning
- Power on Demand
-
Brand Smarty Part Number S-06
$685.00 -
Mads Smarty Tuner – S-03
About this item
- CaTCHER software modules.
- Ten different performance levels.
- Fastest download in the industry, a typical ECM update takes just two minutes.
- ABS tire height updates in just seconds.
- Not traceable by the dealer in the stock setting. Smarty leaves no footprint.
- Cold weather 3 Cylinder High Idle is enabled in all software.
-
Brand Smarty Part Number S-03
$645.00 -
MagnaFlow Jeep Wrangler Rock Crawler Series Cat-Back Performance Exhaust System
SPECIFICATIONS
- Type
- Cat-Back
- Series
- Rock Crawler
- Main Piping Diameter
- 2.5″
- Exit Style
- Single Straight Driver Side Rear
- Inlet Connection Type
- Clamp-On
- Muffler Quantity
- 1
- Muffler Type
- Straight-Through
- Muffler Material
- Stainless Steel
$597.00 -
Smarty JR-67 for Dodge Cummins Turbodiesel 6.7L (2007 – 2012)
About this item
Product Name: Smarty JR for Dodge Cummins
Manufacturer: Mads Smarty
Manufacturer Part #: SJ-67
Fitment Notes: Smarty JR-67 for Dodge Cummins Turbodiesel 6.7L (2007 – 2012)$495.00 -
McGard 65515BK Black Spline Drive 5 Lug Wheel Installation Kit (M14 x 1.5), 16 Lug Nuts / 4 Locks / 1 Key / 1 Install Tool
About Item:
Material Steel Fastener Type Wheel Thread Size M14 x 1.5 Exterior Finish Painted Color Black - Seat Style Cone Seat Nut; Thread Size M14 x 1.5; Overall Length 1.648; Hex Size 22mm; Includes 16 Lug Nuts-1 Installation Tool-4 Wheel Locks-1 Key & 1 Key Pouch
- SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts; In addition they are 30% lighter in weight. Available in a variety of colors and styles. One is sure to match your wheel style or color. The black, gold or chrome plating on all of our lug nuts are guaranteed for life not to chip, peel or rust…ever! For aluminum wheels only. Box Kits include SplineDrive lug nuts, installation tool, tool storage pouch and chrome sleeve valve stems. Chrome, gold and black kits include 4 wheel locks, wheel lock key tool and I.D. card. Colored cap kits do not include wheel locks
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
- Please note that wheel locks and lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts
- Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by the factory or dealership.
$377.44 -
McGard 84640 Black Cone Seat Wheel Installation Kit for 6 Lug Vehicles (M14 x 1.5 Thread Size)
About Item:
Material Steel Fastener Type Wheel Thread Size M14 x 1.5 Exterior Finish Machined Color Black - Cone Seat Nut; Thread Size M14 x 1.5; Overall Length 1.945; Hex Size 22mm; Includes 20 Lug Nuts-4 Wheel Locks-1 Key & 1 Key Pouch
- Wheel locks and Cone Seat lug nuts install Kit includes Lug Nuts, Wheel Locks , 1 unique Key and 1 Key Pouch. For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
- Please note that Wheel locks and lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks and lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts
- Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by the factory or dealership.
$252.77 -
McGard 84640 Black Cone Seat Wheel Installation Kit for 6 Lug Vehicles (M14 x 1.5 Thread Size)
About Item:
Material Steel Fastener Type Wheel Thread Size M14 x 1.5 Exterior Finish Machined Color Black - Cone Seat Nut; Thread Size M14 x 1.5; Overall Length 1.945; Hex Size 22mm; Includes 20 Lug Nuts-4 Wheel Locks-1 Key & 1 Key Pouch
- Wheel locks and Cone Seat lug nuts install Kit includes Lug Nuts, Wheel Locks , 1 unique Key and 1 Key Pouch. For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
- Please note that Wheel locks and lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks and lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts
- Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by the factory or dealership.
$252.77 -
MCGARD 65557BK Black SplineDrive Wheel Installation Kit (M12 x 1.5 Thread Size) – for 5 Lug Wheels
About Item:
Material Steel Fastener Type Wheel Thread Size M12 x 1.5 Exterior Finish Painted Color Black - Seat Style Cone Seat Nut; Thread Size M12 x 1.5; Overall Length 1.24; Hex Size 13/16; Includes 16 Lug Nuts-1 Installation Tool-4 Wheel Locks-1 Key & 1 Key Pouch
- SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts; In addition they are 30% lighter in weight. Available in a variety of colors and styles. One is sure to match your wheel style or color. The black, gold or chrome plating on all of our lug nuts are guaranteed for life not to chip, peel or rust…ever! For aluminum wheels only. Box Kits include SplineDrive lug nuts, installation tool, tool storage pouch and chrome sleeve valve stems. Chrome, gold and black kits include 4 wheel locks, wheel lock key tool and I.D. card. Colored cap kits do not include wheel locks
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
- Please note that wheel locks and lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts
- Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by the factory or dealership.
$247.01
SHOP THE SALE: TAKE UP TO 10% OFF RV Soft Starter, Exhaust, Winches & MORE
