-
NX HOT WATER BOTTLE BATH
About item:
Hot Water Bottle Baths are a quick, reliable and convenient way to maintain consistent pressure in your 10, 12, or 15lb nitrous bottles.
The Nitrous Express Hot Water Bottle Bath is the best engineered and the highest quality water based bottle heater available. The high strength polymer construction allowed us to build in features and benefits that would not be possible with welded metal tanks. The polymer tank is stronger and more durable than a comparable metal tank plus the composite tank will never rust or oxidize. The polymer tank insulates better than metal tanks so the water heats quicker and the heater element does not have to turn on as often. The tank design also allowed us to house the electronics behind the front panel so you don’t have an ugly square box hanging off the front of the tank. We molded a separator shelf inside the tank which keeps the bottles from sliding into the heating element during transport. Carrying slots are flush molded into the side of the tank to minimize the space the tank occupies. The digital display is mounted on the top of the tank so you do not have to bend over to see the temperature setting. The digital control circuit is easy to set and automatically maintains water temperature within 1 degree of accuracy.
$637.04 -
Maximizer 6 Progressive Controller
About item:
- The Maximizer 6 features many safety features that help you push your tune-up further while protecting your engine from damage.
The Maximizer 6 progressive nitrous controller operates up to four separate stages of nitrous based on either time, RPM, MPH, throttle percentage or boost pressure. Whether your engine is naturally aspirated or forced induction, gasoline or diesel, the Maximizer 6 is the first choice.
Safety Features
The Max 6 monitors throttle percentage, engine rpms, nitrous PSI, boost or pan vacuum as well as 3 other user defined sensors to ensure that your engine is in the correct state to accept nitrous. If the Max 6 detects any condition that is outside the safe range, the Max 6 will shut down or pull back nitrous flow to protect your engine from any damage.
$617.27 - The Maximizer 6 features many safety features that help you push your tune-up further while protecting your engine from damage.
-
Nitrous Express 16008 Maximizer 5 Progressive Controller Incl. Internal Drivers for Stage One and Stage Two Operates Up to 4 Separate Stages of Nitrous Maximizer 5 Progressive Controller
About item:
Consistency is key when going fast and the Nitrous Express Pressure Gauge makes sure you are doing just that!
This high accuracy liquid filled 2-1/16″ nitrous pressure gauge reads from 0 to 1500 psi.
Includes:
- High accuracy 2-1/16″ nitrous pressure gauge
- Billet aluminum 4AN manifold with two 1/8 NPT ports
- 1/8 NPT Plug
$617.27 -
Nitrous Express Nitrous Oxide System, Proton Plus, Wet, Single Stage, 35-150 HP, 10 lb Bottle, White, Universal EFI, Kit
About item:
Proton nitrous systems combine performance, durability and value in a compact and easy to mount, made in the USA, nitrous / fuel module. Proton systems now contain a new and improved nitrous / fuel module that is capable of producing up to 250 horsepower to the wheels! The new nitrous / fuel module is extremely durable and is compatible with progressive nitrous controllers. This Proton Plus system includes jetting for 35HP, 50HP, 75HP, 100HP, 125HP and 150HP but can flow up to 250HP with the optional SHO jet kit. This system includes a 10lb nitrous bottle with a high flow billet aluminum Lightning bottle valve, stainless bottle brackets, a single Shark nozzle, nozzle adapter, stainless braided nozzle lines, 15 foot braided stainless feed line, stainless fuel line, master arming switch, wide open throttle switch, 40 amp relay, relay harness as well as every nut, bolt and electrical connector needed to complete the installation. Fits all electronic fuel injected vehicles with a single throttle body.
- Model Number: 20421-10
- Item Package Dimension: 28.0″ L x 11.0″ W x 10.0″ H
- Item Package Weight: 20.0 lb
$605.04 -
Proton Series Nitrous System W/ 10Lb Bottle
About item:
Proton Series nitrous systems combine performance, durability and value in a compact and easy to mount module. Proton systems contain high quality, made in the USA, solenoids that are capable of producing 250 horsepower to the wheels. The black anodized aluminum housing not only looks great, it pulls heat away from the solenoids for extreme durability.
This system fits all electronic fuel injected vehicles with a single throttle body.
This Proton system includes:
- 10lb nitrous bottle with a standard bottle valve
- Stainless bottle brackets
- Piranha nozzle
- Stainless braided nozzle lines
- Braided stainless feed line
- Master arming switch
- Push button activation switch
- Jetting for 35HP, 50HP and 75HP
$540.30 -
Mainline EFI Single Nozzle System With 10Lb Bottle
About item:
If you are a serious nitrous junkie on a tight budget we have what you have been waiting for! NX introduces MainLine Nitrous Systems. MainLine Systems benefit from the years of research and development that made Nitrous Express the leader in the nitrous world, but at a price even the most budget-restricted racer can afford. Just the basics, no frills, just rock solid performance at rock bottom prices.
Includes:
- 10lb Nitrous Bottle with Standard Brass Valve
- Jetting for 50, 100, 150HP
- Stainless Steel Bottle Brackets
- NX Piranha Nozzle
- Stainless braided nitrous and fuel lines
- Mainline .078 orifice nitrous solenoid
- Mainline .112 orifice fuel solenoid
- 4AN stainless steel braided feedline
If you have an aftermarket engine management system that is capable of adding nitrous enrichment fuel and want this system DRY (no fuel components), please call us at (940) 767-7694.
$524.91 -
Mainline Carb. System With 10Lb Bottle
About item:
If you are a serious nitrous junkie on a tight budget we have what you have been waiting for! NX introduces MainLine Nitrous Systems. MainLine Systems benefit from the years of research and development that made Nitrous Express the leader in the nitrous world, but at a price even the most budget-restricted racer can afford. Just the basics, no frills, just rock solid performance at rock bottom prices. The ML1000 will outperform any other 250HP carbureted kit on the market, guaranteed to make 250HP. Most of it s competitors promise 250HP but only produce 160WHP!
Includes:
- 10lb Nitrous Bottle with Standard Brass Valve
- Jetting for 100, 150, 200, 250HP
- Stainless Steel Bottle Brackets
- NX Mainline Nitrous Plate
- Stainless steel hardlines for solenoid mounting
- Mainline .078 orifice nitrous solenoid
- Mainline .112 orifice fuel solenoid
- 4AN stainless steel braided feedline
$524.31 -
Torklift S9527 Fast Gun Short Range, (Set of 2)
About Item:
- TorkLift Fastgun Short Range 45″ Turnbuckles, Two per kit
- Fastgun is the number one selling truck camper turnbuckle, and is 100 percent tool-free and lockable
- Features spring tension indicator, and the legendary lifetime manufacture warranty
- Made in the USA
- Model S9527 works only with bed mounted front tie downs, 14.5 inch to 21.5 inch reach Short range, stainless steel, polished
$451.13 -
Torklift S9526 Long Polished FastGun Turnbuckle
About Item:
- QUICK RELEASE: Quick release handle design connects and disconnects in seconds, allowing for easy tool-free adjustment
- HEAVY DUTY: Pair of truck camper turnbuckles made from high-impact powder-coated stainless steel; Material: Steel; Color: Grey; Dimensions (L x W x H): 30 x 4 x 3 inches; Weight: 8 pounds; Manufacturer warranty: Lifetime warranty
- IDEAL TENSION: Built-in tension indicators determine the ideal tension necessary to hold down truck camper while in use
- SAFER RIDE: Spring-loaded design ensures a safe ride for your family and your truck camper; add a FastGun lock for additional security (not included)
- LONG RANGE: Long-range design intended for frame-mounted tie downs with a reach of 25 to 43 inches
$451.13 -
Torklift S9530 Fastgun Turnbuckle
About Item:
- QUICK RELEASE: Quick release handle design connects and disconnects in seconds, allowing for easy tool-free adjustment
- HEAVY DUTY: Pair of truck camper turnbuckles made from high-impact powder-coated stainless steel; Material: Steel; Color: Grey; Dimensions (L x W x H): 30 x 4 x 3 inches; Weight: 8.5 pounds; Manufacturer warranty: Lifetime warranty
- IDEAL TENSION: Built-in tension indicators determine the ideal tension necessary to hold down truck camper while in use
- SAFER RIDE: Spring-loaded design ensures a safe ride for your family and your truck camper; add a FastGun lock for additional security (not included)
- LONG RANGE: Long-range design intended for frame-mounted tie downs with a reach of 25 to 43 inches
$439.88 -
Torklift S9529 Fast Gun Turn Buckle
About Item:
Torklift S9529 Fast Gun Turn Buckle
$439.88 -
Torklift S9522 Quick-Release Frame-Mount Stainless Steel FastGun Long Range Truck & Camper Turnbuckles, Grey (Pair)
About Item:
- Torklift Fastgun Long Range Turnbuckle – Grey
$439.88 -
Torklift A7202 Stable Load Upper Overload for Ford Dodge & GM Trucks
About Item:
- Engineered for Ford, Dodge and GM trucks fitted with factory upper contact overloads
- Torklift’s StableLoad for upper overload applications is designed to replace the smaller, inefficient factory overload bump stop pads, putting the upper overload springs to work sooner
- It dramatically stabilizes the vehicle suspension and makes the vehicle’s passengers and load significantly safer.
- The StableLoad upper overload is available for a very quick and simple no-drill installation with serious improvement results.
- StableLoad kits work equally well with or without aftermarket airbags overloads.
$412.26 -
Torklift A7310 StableLoad Quick Disconnect for Ford/Chevrolet
About Item:
- Brand New
- Some trucks require drill kit-check your fitment before ordering
- Fits vehicles equipped with lower overload springs that come already pre-drilled from the vehicle manufacturer
- Fits vehicles equipped with lower overload springs that come already pre drilled from the vehicle manufacturer
$412.26 -
Torklift A7200 Stable Load, (Set of 4)
About Item:
Brand Torklift Item Weight 0.01 Ounces Vehicle Service Type Truck Finish Type Powder Coated Manufacturer Torklift - Torklift Stable Load Spring Pads
- Put your leaf springs back to work; Specifically engineered for all towing and hauling applications on 85-08 Ford Super Duty and 94-08 Dodge Heavy Duty trucks
- Torklift’s large Stable Load Spring Pads replace the smaller, inefficient factory rubber bump stop pads, putting the factory springs back to work stabilizing the suspension and the truck’s load
- Kit includes: 4 Stable Loads
- Quick no-drill installation
$412.26
SHOP THE SALE: TAKE UP TO 10% OFF RV Soft Starter, Exhaust, Winches & MORE