-
Electric Fuel Pump Gas for Ford for F150 4.2L/4.6L 1997-2003 & 5.4L 1999-2003 for F250 4.6L/5.4L 1997-1999 Truck Without Pressure Sensor HP10089
About Item:
- Fitment:for Ford,for F150 4.2 L/4.6 L 1997-2003 & 5.4 L 1999-2003,for F250 4.6 L/5.4 L 1997-1999
- Assembly: Fuel Pump with Module
- Part Number:HP10089
- Operation:Electric
- Pressure Sensor Included:Without Pressure Sensor
- Part Name:Fuel Pump
- Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent
$409.88 -
GBoost Worlds Best Belt – Polaris XP Turbo, RS1, Ranger
- Highest shock load rating to date being able to withstand the power of the 400hp machines.
- 3rd Generation heavy-duty, high-twist Aramid Fiber cord for HIGH HORSEPOWER TENSILE LOAD requirements. Making it the strongest belt on the market, surpassing even our EX and Sand Storm lines.
- Bottom cog uses HIGH MODULOUS RUBBER COMPOUND (BZX1) for better heat resistance and heat dissipation.
- Precision ground sidewall angle (SCUFFING) for smooth engagement, increased power transfer and lower operating belt temperature.
$169.95 -
GXP RockJock Antirock .850inch Front Sway Bar Kit RJ-246100-101 Compatible with 18+ Wrangler JL / 18+ Gladiator JT
About Item:
- 4130 heat treated chromoly sway bar Billet aluminum bolt on frame brackets (Black powder coat) Forged chromoly offset sway bar arms (Black powder coat)
- Delrin sway bar bushings Adjustable length heim jointed sway bar links All necessary hardware, and step by step instructions
- Fitment: Fitment: 2018 Wrangler JL, All Models 2020 Gladiator, All Models
- NOTE: JL and JT Rubicon models equipped with the electronic sway bar, will require the use of a tuner (AEV ProCal or equivalent) to turn off the sway bar dash light when the factory sway bar is removed
- NOTE: This kit will work on Mojave models and bolt on exactly the same, however, if the factory Mojave shocks are retained, the shock reservoirs will have to be relocated to allow the installation of the Antirock Sway Bar kit
- fit_type Vehicle Specific
$643.00 -
JL (LIGHT JT) ANTIROCK FRONT SWAY BAR KIT (FORGED ARMS, 770 IN. BAR)
About Item:
- Antirock Sway Bar Kit, JL/JT Front, Bolt-On, Forged Arms,
$643.00 -
Mads Smarty POD Tuner – S-06
About this item
- CaTCHER software’s inside
- Ten different performance levels
- Fastest download in the industry, up to three times faster than the competition, a typical ECM update takes about 3.5 to 5 minutes
- ABS tire height updates in just few seconds
- Not traceable in the stock setting. Smarty leaves no footprint.
- Manual High Idle is enabled in all softwares
- Reads Diagnostic Trouble Codes in plain text
- No tools required, no fuses to pull
- USB built in for simple updates
- Free internet updates
- Most complete keyboard in the industry
- Reliable, it works off your OEM hardware
- Programmable Speed Limiter from 25 to 250 mph
- Programmable parameters for fine tuning
- Power on Demand
-
Brand Smarty Part Number S-06
$685.00 -
Mads Smarty SSR Tuner – SSR59
About this item
Product Name: Mads Smarty SSR Tuner
Manufacturer: Mads Smarty
Manufacturer Part #: SSR
Thoroughbred Diesel Part #: SMASSR59
Fitment Notes: Mads Smarty SSR Tuner – 03-07 Dodge Cummins 5.9L$735.00 -
MADS SMARTY TOUCH COMMOD COMMUNICATION MODULE 10-18 RAM 6.7L CUMMINS – COMMOD
About this item
- Unlocks ECM
- Enables Shift-On-The-Fly
- Works With Smarty Touch
-
Brand Smarty Part Number COMMOD Product Code Programmers & Tuners
$209.00 -
Mads Smarty Tuner – S-03
About this item
- CaTCHER software modules.
- Ten different performance levels.
- Fastest download in the industry, a typical ECM update takes just two minutes.
- ABS tire height updates in just seconds.
- Not traceable by the dealer in the stock setting. Smarty leaves no footprint.
- Cold weather 3 Cylinder High Idle is enabled in all software.
-
Brand Smarty Part Number S-03
$645.00 -
Mile Marker 435 Premium Manual Hub Set
About item:
Replaces original equipment manual or automatic Hubs.
- Heavy duty dial for secure engagement/disengagement
- Chrome construction with heavy duty spring for heavy duty strength and corrosion resistance
- For 28 spine axles
- Includes 2 hubs (pair), springs, clips and wrench
$169.99 -
Mile Marker 549 Fits Ford F-550 Super Duty
About item:
Mile Marker Custom Shop products will add 4-6 weeks to production time.
Replaces the original equipment manual or automatic Hubs.
- All metal cap and dial for enhanced durability
- Marine grade stainless steel hardware
- Waterproof and corrosion resistant
- Easy to install
- Limited lifetime
FITS 2005 & NEWER FORD SUPER DUTY TRUCKS
$185.00 -
MILE MARKER 77-50141W SEC8(ES) Truck/Jeep/SUV Element Sealed Electric Winch – 8,000 lb. Capacity, 1 Pack
About item:
The Mile Marker SEC8 is a no-frills, down to business winch with 8,000 pounds of pulling power. Boasting blazing line speeds, a high output 4.9 HP series wound motor, and an automatic load-holding brake system, this is the essential winch for overland explorers and competition rigs seeking to quench their adventurous thirst as they traverse the globe’s harshest condition
Fully-sealed, submersible, water, mud, and snow proof, the SEC8 includes a Steel Cable Version that comes with a 5/16” x 100’ steel cable, a roller fairlead, the Synthetic Rope version comes with a 5/16” x 92’ synthetic rope, an anodized aluminum hawse or roller fairlead. Both come with stainless steel hardware, a corrosive resistant body, a hook and a handheld remote control with a 12′ cord.
Main Features:
• 4.9 HP Series Wound Motor
• Rugged Planetary Gear Sets
• Clockable Gear Housing
• Fast Line Speeds
• Submersible, 400 Amp Solenoid
• Automatic Load Holding Brake
• Corrosion Resistant Stainless Steel Fasteners
• 100’ of Steel Cable Or 92’ of Synthetic Rope
• Roller Fairlead Or Aluminum Hawse
• Waterproof
• Handheld Remote Control$639.99 -
Mile Marker ATV UTV Winch Accessory Kit – 19-00105,8
About item:
The Mile Marker ATV/UTV Recovery Kit includes everything that you need to push your trail blazing ATV or UTV to the limits: Two 5/8″ powder-coated shackles, two 1″ X 8′ recovery straps, a snatch block, and a pair of recovery gloves are all conveniently packaged in a durable carrying case that can be strapped and mounted virtually anywhere on your rig.
ATV/UTV ACCESSORY KIT INCLUDES:
• Durable Carrying Case
• 8K Snatch Block
• Two 5/8″ Powder Coated Shackles
• Two 1″x 8′ Recovery Strap
• 1 Pair of Gloves$79.99
SHOP THE SALE: TAKE UP TO 10% OFF RV Soft Starter, Exhaust, Winches & MORE
