-
12V HP325 Series Basic Air Compressor Air Compressor and Required Hardware Only
About Item:
Brand Pacbrake Voltage 12 Volts Recommended Uses For Product Drilling, Air Brushing, Spraying, Nailing Power Source Battery Powered Special Feature Portable - Get quick and effortless inflation power at your fingertips.
- Pacbrake’s HP325 series Pacbrake air compressors have a 33% duty cycle (20 minutes @ 100 psi), deliver 1/4 horsepower and are offered in both 12 and 24 VDC.
- A copper wire wound permanent magnet motor.
- Oil-less design and sealed bearings.
- Cast aluminum cylinder head and hard anodized aluminum sleeve.
$217.06 -
Electric Fuel Pump Gas for Ford for F150 4.2L/4.6L 1997-2003 & 5.4L 1999-2003 for F250 4.6L/5.4L 1997-1999 Truck Without Pressure Sensor HP10089
About Item:
- Fitment:for Ford,for F150 4.2 L/4.6 L 1997-2003 & 5.4 L 1999-2003,for F250 4.6 L/5.4 L 1997-1999
- Assembly: Fuel Pump with Module
- Part Number:HP10089
- Operation:Electric
- Pressure Sensor Included:Without Pressure Sensor
- Part Name:Fuel Pump
- Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent
$409.88 -
Mads Smarty SSR Tuner – SSR59
About this item
Product Name: Mads Smarty SSR Tuner
Manufacturer: Mads Smarty
Manufacturer Part #: SSR
Thoroughbred Diesel Part #: SMASSR59
Fitment Notes: Mads Smarty SSR Tuner – 03-07 Dodge Cummins 5.9L$735.00 -
Pacbrake HP10158 ALPHA HD Rear Air Suspension Kit Compatible with Toyota Tundra 2002-2006
About Item:
Brand Pacbrake Auto Part Position Rear Material Alloy Steel, Aluminum Included Components all components required for install Manufacturer Pacbrake - Designed for durability and performance, the ALPHA HDTM Series offers a Better Built, Better Priced solution for heavy-duty applications
- Up to 5,000 lbs of load leveling capacity
- Application: 2001-2006 Toyota Tundra (2WD/4WD)
- Application Notes: This kits is for trucks in which the upper jounce bumper pad protrudes 1″ below the frame. All Toyota Kits require a minimum of 5” between the tire and the frame and will only fit with stock wheels and tires.
$341.09 -
Pacbrake HP10171 ALPHA HD Rear Air Suspension Compatible with Silverado/Sierra 2500/3500 2011-2019
About Item:
- Pacbrake Heavy Duty Double Convoluted Air Spring / Air Suspension Kits are the only air springs (or air helper springs) on the market with one piece aluminium end caps and 20 support wires giving you maximum strength and durability!
- Each Pacbrake Double Convoluted Air Spring / Air Suspension Kit is equipped with corrosion resistant roll plates, precision laser cut powder coated steel brackets, grade 5 plated hardware, airline and all accessories required for the perfect bolt on install.
- Pacbrake Air Springs come with a Lifetime Warranty.
- Rated to 5,000 lbs
- Compatible with Chevrolet Silverado/GMC Sierra 2500/3500 2011-2019 (2WD/4WD)
$422.78 -
Pacbrake HP10352 ALPHA HD Rear Air Suspension Kit Compatible with Ford Ranger 2019-2023
About Item:
- Pacbrake Heavy Duty Double Convoluted Air Spring / Air Suspension Kits are the only air springs (or air helper springs) on the market with one piece aluminium end caps and 20 support wires giving you maximum strength and durability!
- Rated to 1,800 lbs
- Application: Compatible with Ford Ranger 2019-2023
- Application Notes: WILL NOT FIT: Tremor models
$190.06 -
Pacbrake HP10387 ALPHA HD Air Spring Suspension Kit Compatible with Ford F-250/F-350 (2WD/4WD) 2011-2016
About Item:
- Designed for durability and performance, the ALPHA HD Series offers a Better Built, Better Priced solution for heavy-duty applications
- Up to 5,000 lbs of load leveling capacity
- Application: COMPATIBLE WITH FORD F250/F350 (2WD/4WD) 2011-16 & F450 (2WD/4WD) 2011-14
- Application Notes: Fits models equipped with or without 5th Wheel Hitch
$390.56 -
Pacbrake HP20327-QM Dual Channel (2nd Generation) Wirelesss Air Spring Controls (Quick Mount)
About Item:
- Dual Path Control – adjust your air springs independantly to adjust for uneven loads.
- 3x Signal Strength – gone are any frustrations associated with connecting phone and controller.
- Waterproof and debris resistant – Demand a Pacbrake IP67 rated controller.
- Quick Mount Kit – comes with Quick Mount bracket for effortless bolt-on installation.
- Military grade solenoids – designed to withstand extreme cold, heat, moisture or salt spray.
- Ultra Easy Connections– Pre-installed push-to-connect air fittings and pre-assembled wiring connectors reduces installation time to under an hour!
- Works in the Backcountry – strong bluetooth connection; does not require cellular service to operate.
$789.99 -
Pacbrake HP20472-QM Single Channel Wireless (2nd Generation) w/SD Compressor (Quick Mount)
About Item:
Brand Pacbrake Voltage 12 Volts (DC) Recommended Uses For Product Vehicle Air Spring Control, Tire Inflation Power Source Corded Electric Special Feature Heavy Duty - Single Path Control – left and right air springs are inflated/deflated equally.
- 3x Signal Strength – gone are any frustrations associated with connecting phone and controller.
- Waterproof and debris resistant compressor and controller!
- Military grade solenoids – designed to withstand extreme cold, heat, moisture or salt spray.
- Ultra Easy Connections– Pre-installed push-to-connect air fittings and pre-assembled wiring connectors reduces installation time to under an hour!
- Works in the Backcountry – strong bluetooth connection; does not require cellular service to operate.
- Quick Mount Kit – comes with Quick Mount bracket for effortless bolt-on installatio
$459.99 -
Smarty JR-67 for Dodge Cummins Turbodiesel 6.7L (2007 – 2012)
About this item
Product Name: Smarty JR for Dodge Cummins
Manufacturer: Mads Smarty
Manufacturer Part #: SJ-67
Fitment Notes: Smarty JR-67 for Dodge Cummins Turbodiesel 6.7L (2007 – 2012)$495.00 -
SMARTY S67 TUNER BY MADS ELECTRONICS 07.5-12 DODGE 6.7L CUMMINS 5.0
About this item
Product Name: Mads SMARTY S67 TUNER
Manufacturer: Mads Smarty
Manufacturer Part #: S-67
Fitment Notes: SMARTY S67 TUNER BY MADS ELECTRONICS 07.5-12 DODGE 6.7L CUMMINS 5.0$685.00 -
Smarty Tuners Touch Thermocouple EGT (Exhaust Gas Temperature) Sensor Kit – S2GEGT
About this item
- Innovative engineering, extensive field testing
- Exceptional quality control
- Provides longer brake life and performance
-
Brand Smarty Tuners Part Number S2GEGT Product Code Programmers & Tuners
$158.00 -
Tiger Tool – Bva Hydraulic Pump With 6 Hose & Gauge (70129)
About Item:
- Leading Manufacturer Of High-Quality Products
- International Renown For Our Diverse Range Of Award-Winning Products
- Fully Equipped With State-Of-The-Art Technology
- All Products Have Been Designed With The Professional In Mind
- Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User
$785.99 -
Tiger Tool Brake Anchor Pin Press Made for Commercial Heavy Duty Trucks, Break Anchor Pin Press for Semi Trucks, Works on Class 6 – 8 Transportation Trucks & Equipment, 16002
About Item:
Brand Tiger Tool Item dimensions L x W x H 4.6 x 2.6 x 5.6 inches Color Factory Style Modern Item Weight 0.2 Ounces Tensile Strength 10 Tons UPC 683552160028 Manufacturer Tiger Tool - EFFICIENT MAINTENANCE: The Tiger Tool 16002 makes removing brake anchor pins and bushings a breeze on nearly all 16-1/2” S-Cam trailer and tractor “Q” brake systems, significantly reducing service time and ensuring a safe, damage-free process.
- WIDE COMPATIBILITY: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.). In the event you are servicing a stamped spider, a punch and chisel may be required to remove the bushing.
- ROBUST CONSTRUCTION & DESIGN: Featuring a sturdy C-frame with a 10-ton capacity, the Brake Anchor Pin Press is built from high-grade steel, ensuring both strength and longevity. Its compact design allows for efficient service directly on the vehicle, bypassing the need to remove the hub and dust shield, saving time, and avoiding the hassle of dealing with rusted or broken dust shield bolts.
- SIMPLE & ACCESSIBLE OPERATION: No need for specialized tools – the 16002 operates with a standard 7/8” hex drive and includes a bushing removal adapter. This design simplicity ensures that removing both anchor pins and bushings is straightforward, making it accessible to all technicians.
- NORTH AMERICAN CRAFTMANSHIP & INNOVATION: Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction.
$319.99 -
Tiger Tool Commercial Tie Rod End Remover Kit, Includes 3 Removal Tools for 7/8″ – 14 (Class 6-8 Trucks), 3/4″ – 16 (Class 3-5), & M20 x 1.5 (European Trucks), 10310
About Item:
- EFFICIANT & SAFE: Experience unparalleled efficiency with the Tiger Tool Tie Rod End Remover, designed to safely “shock” loose tie rod ends without causing harm to threaded areas, rubber seals, or grease nipples, ensuring a damage-free removal process for heavy-duty maintenance.
- WIDE COMPATIBILITY: Commonly found on class 3-8 trucks and equipment. (For use with Ram 3500/5500, for use with Chevrolet 3500/5500, for use with Ford F-350/550, for use with Isuzu NPR, for use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, for use with European Trucks and Equipment etc.).
- HIGH QUALITY: Constructed with premium high-grade steel, the Tiger Tool Tie Rod End Remover stands as a testament to durability and strength. This tool is built to withstand the rigors of heavy-duty use, ensuring long-term reliability and consistent performance for mechanics and technicians.
- DURABILE & STRONG: Enhanced with a robust black oxide finish, each of the Tie Rod End Removers offer superior corrosion resistance, providing peace of mind and assurance of longevity, even in the most challenging working conditions and environments.
- NORTH AMERICAN CRAFTMANSHIP & INNOVATION: Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction.
$171.99