-
TeraFlex 3442002 Ball Joints (Premium JK Dana 30/44 Ball Joint Kit)
About Item:
- Fits JK/JKU Wrangler w/ Dana 30 or 44 axle
- Heat treated 4140 chromoly ball/stud and 1045 carbon steel housing
- 2 grease zerk fittings allow greasing access from either side
- Extremely hard sintered wear bushings to handle extreme side load demands w/out failure
- 30mm (1.18″) adjustable ball stud for accurate initial and future preload adjustments using simple hand tools
- All 4 Ball Joints
- Fits 07-12 JK ONLY
$307.99 -
TeraFlex 1251000 2.5″ Lift Kit (JK 4 Door with All (4) 2.5″ Shock)
About Item:
Brand TeraFlex Auto Part Position Rear Material Metal Included Components Instructioins^stickers^Hardware^4 shocks^4 coils^ bumpstops^trackbar bracket^swaybar links Maximum Lifting Height 2.5 Inches - This kit includes 2. 5″ lift coil springs, 9550 VSS shock absorbers, rear sway bar links, heavy duty rear track bar axle bracket, bump stop extensions and all necessary hardware
- This kit will allow you to run up to a 35″ tire (aftermarket wheels with 4. 5″ backspacing or less are required)
- Note: 2012+ JKs may require exhaust spacers (#2610000) or other exhaust modification for proper driveshaft clearance if front extended shock length is greater than 24. 5″
- Fit type: Vehicle Specific
$967.98 -
Smarty JR-67 for Dodge Cummins Turbodiesel 6.7L (2007 – 2012)
About this item
Product Name: Smarty JR for Dodge Cummins
Manufacturer: Mads Smarty
Manufacturer Part #: SJ-67
Fitment Notes: Smarty JR-67 for Dodge Cummins Turbodiesel 6.7L (2007 – 2012)$495.00 -
SMARTY S67 TUNER BY MADS ELECTRONICS 07.5-12 DODGE 6.7L CUMMINS 5.0
About this item
Product Name: Mads SMARTY S67 TUNER
Manufacturer: Mads Smarty
Manufacturer Part #: S-67
Fitment Notes: SMARTY S67 TUNER BY MADS ELECTRONICS 07.5-12 DODGE 6.7L CUMMINS 5.0$685.00 -
Mads Smarty SSR Tuner – SSR59
About this item
Product Name: Mads Smarty SSR Tuner
Manufacturer: Mads Smarty
Manufacturer Part #: SSR
Thoroughbred Diesel Part #: SMASSR59
Fitment Notes: Mads Smarty SSR Tuner – 03-07 Dodge Cummins 5.9L$735.00 -
Mads Smarty POD Tuner – S-06
About this item
- CaTCHER software’s inside
- Ten different performance levels
- Fastest download in the industry, up to three times faster than the competition, a typical ECM update takes about 3.5 to 5 minutes
- ABS tire height updates in just few seconds
- Not traceable in the stock setting. Smarty leaves no footprint.
- Manual High Idle is enabled in all softwares
- Reads Diagnostic Trouble Codes in plain text
- No tools required, no fuses to pull
- USB built in for simple updates
- Free internet updates
- Most complete keyboard in the industry
- Reliable, it works off your OEM hardware
- Programmable Speed Limiter from 25 to 250 mph
- Programmable parameters for fine tuning
- Power on Demand
-
Brand Smarty Part Number S-06
$685.00 -
Mads Smarty Tuner – S-03
About this item
- CaTCHER software modules.
- Ten different performance levels.
- Fastest download in the industry, a typical ECM update takes just two minutes.
- ABS tire height updates in just seconds.
- Not traceable by the dealer in the stock setting. Smarty leaves no footprint.
- Cold weather 3 Cylinder High Idle is enabled in all software.
-
Brand Smarty Part Number S-03
$645.00 -
MADS SMARTY TOUCH COMMOD COMMUNICATION MODULE 10-18 RAM 6.7L CUMMINS – COMMOD
About this item
- Unlocks ECM
- Enables Shift-On-The-Fly
- Works With Smarty Touch
-
Brand Smarty Part Number COMMOD Product Code Programmers & Tuners
$209.00 -
SMARTY 98.5+ DODGE/RAM CUMMINS TOUCH TUNER – TOUCH
About this item
- Two devices: Smarty Touch Display and Smarty Touch Controller each with its own CPU. The Display for the graphics user interface and the controller for communicating with the ECM.
- Fastest display start up in the industry. Just four seconds!
- Fastest PID refresh speed in the industry.
-
Brand Smarty Part Number TOUCH UPC SMAS2G Product Code Programmers & Tuners
$865.00
SHOP THE SALE: TAKE UP TO 10% OFF RV Soft Starter, Exhaust, Winches & MORE
