-
Nitrous Express 11700L Lightning 45 Bottle Valve for 10 lbs. Bottle
About item:
Nitrous Express has spent countless hours on the flow bench, eliminating these turbulence points in its systems to minimize the boiling of the nitrous charge. NX has designed its own bottle valve, which differs in many ways from the standard or even custom valves offered by the other companies. The flow path of the NX “Lightning” bottle valve has only one turn, a 45-degree angle to the discharge point. This eliminates the harsh 90-degree turn present in most bottle valves. One company that boasts of its “Super High Flow Valve” has designed one 45-degree turn and one 127-degree turn inside the body of the valve. This severely restricts the flow and causes a turbulence point that sends a diluted flow of nitrous downstream to the nitrous solenoid. Finally, the style of bottle nipple used by NX allows the nitrous to transition from the valve to the supply hose with no internal steps or restrictions. These things may seem small or insignificant to the layperson, but on the dyno, NX systems make more horsepower per pound of nitrous than anyone.
Nitrous Express Lightning 500 bottle valves feature a .500″ orifice and a direct flow path that eliminates those power-robbing gaseous bubbles. The result is more horsepower! The Lightning 500 will outflow any competitor’s valve on the market today and is recommended for all nitrous systems up to 2000 nitrous horsepower. The 500 has a .625″ siphon tube, only one 45-degree turn in the nitrous flow path, and fittings that will allow the use of up to a 10AN supply line with no restrictions. The 500 is engineered to eliminate all obstructions, sharp edges, or tight turns that will disrupt the smooth laminar flow of nitrous. This design minimizes boiling and gaseous nitrous in the flow path to the solenoid resulting in a nitrous system that produces more clean horsepower and is easier to tune on any car! The Lightning 500 is CNC machined from billet aluminum and is approximately ½ pound lighter than a comparable brass valve, it has dual gauge ports and interchangeable nipples that will allow the use of 4AN, 6AN, 8AN, or 10AN supply lines.
-
- Valves include a 4AN nipple. Other bottle nipple sizes need to be purchased separately.
- Includes siphon tube for 10lb NX Nitrous Bottle
$125.39 -
-
Nitrous Express 16008 Maximizer 5 Progressive Controller Incl. Internal Drivers for Stage One and Stage Two Operates Up to 4 Separate Stages of Nitrous Maximizer 5 Progressive Controller
About item:
Consistency is key when going fast and the Nitrous Express Pressure Gauge makes sure you are doing just that!
This high accuracy liquid filled 2-1/16″ nitrous pressure gauge reads from 0 to 1500 psi.
Includes:
- High accuracy 2-1/16″ nitrous pressure gauge
- Billet aluminum 4AN manifold with two 1/8 NPT ports
- 1/8 NPT Plug
$617.27 -
Nitrous Express ML15600 Nitrous Purge Valve Kit -04AN Manifold Adapter Fitting Push Button Activation Vent Tube Nitrous Purge Valve Kit
About item:
The Mainline Purge System is designed to purge the air from your nitrous lines to allow immediate activation of your Nitrous system. This System includes a stainless steel purge solenoid, push button for activation, and a vent tube to direct the purged nitrous out of the solenoid. Also included is a -4 AN manifold to run inline with your nitrous feedline. This allows you to purge the nitrous system, even when you do not have a purge port built into your solenoids. The Purge system can also be used to lower the bottle pressure for spot on nitrous performance every time you activate the system.
Purge System includes:
- Purge Solenoid.
- 4 AN adapter manifold.
- Push button activation.
- 1/8 to 1/8 NPT Fitting.
- 1/8 NPT to Compression Fitting.
- 7 inches of 3/16″ Stainless Tubing.
If you run a larger -6 AN feedline, the correct Mainline purge system is PN# ML15601.
$131.21 -
Nitrous Express Nitrous Oxide System, Proton Plus, Wet, Single Stage, 35-150 HP, 10 lb Bottle, White, Universal EFI, Kit
About item:
Proton nitrous systems combine performance, durability and value in a compact and easy to mount, made in the USA, nitrous / fuel module. Proton systems now contain a new and improved nitrous / fuel module that is capable of producing up to 250 horsepower to the wheels! The new nitrous / fuel module is extremely durable and is compatible with progressive nitrous controllers. This Proton Plus system includes jetting for 35HP, 50HP, 75HP, 100HP, 125HP and 150HP but can flow up to 250HP with the optional SHO jet kit. This system includes a 10lb nitrous bottle with a high flow billet aluminum Lightning bottle valve, stainless bottle brackets, a single Shark nozzle, nozzle adapter, stainless braided nozzle lines, 15 foot braided stainless feed line, stainless fuel line, master arming switch, wide open throttle switch, 40 amp relay, relay harness as well as every nut, bolt and electrical connector needed to complete the installation. Fits all electronic fuel injected vehicles with a single throttle body.
- Model Number: 20421-10
- Item Package Dimension: 28.0″ L x 11.0″ W x 10.0″ H
- Item Package Weight: 20.0 lb
$605.04 -
Nitrous Pressure Gauge Only (0-1500 PSI)
About item:
Consistency is key when going fast and the Nitrous Express Pressure Gauge makes sure you are doing just that!
This high accuracy liquid filled 2-1/16″ nitrous pressure gauge reads from 0 to 1500 psi.
- Pressure gauge only included
- Measures from 0 to 1500 pascals per square inch
- High accuracy liquid filled nitrous pressure gauge
- Country of Origin : China
$40.94 -
Nitrous Purge Valve With Poly Line (4AN)
About item:
The NX Purge System is designed to purge the air from your nitrous lines to allow immediate activation of your Nitrous system. This System includes a Lightning solenoid, push button for activation, and a vent tube to direct the purged nitrous out of the solenoid. Also included is a 4AN manifold to run inline with your nitrous feedline. This allows you to purge the nitrous system, even when you do not have a purge port built into your solenoids. The Purge system can also be used to lower the bottle pressure for spot on nitrous performance every time you activate the system.
Purge System includes:
- Purge Solenoid
- 4AN Adapter Fitting
- Push button activation
- 1/8 to 1/8 NPT Fitting
- 1/8 NPT to poly line adapter
- 36 inches of 1/8 poly line
$187.74 -
NX HOT WATER BOTTLE BATH
About item:
Hot Water Bottle Baths are a quick, reliable and convenient way to maintain consistent pressure in your 10, 12, or 15lb nitrous bottles.
The Nitrous Express Hot Water Bottle Bath is the best engineered and the highest quality water based bottle heater available. The high strength polymer construction allowed us to build in features and benefits that would not be possible with welded metal tanks. The polymer tank is stronger and more durable than a comparable metal tank plus the composite tank will never rust or oxidize. The polymer tank insulates better than metal tanks so the water heats quicker and the heater element does not have to turn on as often. The tank design also allowed us to house the electronics behind the front panel so you don’t have an ugly square box hanging off the front of the tank. We molded a separator shelf inside the tank which keeps the bottles from sliding into the heating element during transport. Carrying slots are flush molded into the side of the tank to minimize the space the tank occupies. The digital display is mounted on the top of the tank so you do not have to bend over to see the temperature setting. The digital control circuit is easy to set and automatically maintains water temperature within 1 degree of accuracy.
$637.04 -
Proton Series Nitrous System W/ 10Lb Bottle
About item:
Proton Series nitrous systems combine performance, durability and value in a compact and easy to mount module. Proton systems contain high quality, made in the USA, solenoids that are capable of producing 250 horsepower to the wheels. The black anodized aluminum housing not only looks great, it pulls heat away from the solenoids for extreme durability.
This system fits all electronic fuel injected vehicles with a single throttle body.
This Proton system includes:
- 10lb nitrous bottle with a standard bottle valve
- Stainless bottle brackets
- Piranha nozzle
- Stainless braided nozzle lines
- Braided stainless feed line
- Master arming switch
- Push button activation switch
- Jetting for 35HP, 50HP and 75HP
$540.30 -
$26.97 -
Renegade Products Voodoo X Iron Remover for Auto Detailing, Removes Iron, Break Dust and Rust From Paint and Wheels
- PROTECTS PAINT – Voodoo X is an iron remover that removes and destroys harmful iron deposits that collect on your paint. This product is perfect to use before you clay bar & will make the clay bar process much easier!
- PROTECT WHEELS – This product is extremely effective and removing brake dust and other iron particles from every day driving. This product will turn to a dark purple color as the solution reacts and decontaminates the ferrous metal particles. Especially helpful since using a clay bar can be very cumbersome on rims!
- PH BALANCED AND ACID FREE – This formula is extremely effective at removing iron particles and industrial fallout from both wheels and paint while also being acid free and pH-balanced. This will not mar your paint or polished aluminum wheels. It is also safe on chrome!
- CHANGES COLORS – Our iron removing formula changes colors as it reacts with the metal particles, letting you know that the product is effectively attacking the contaminants.
- SATISFACTION GUARANTEED – We guarantee that you will love our iron remover or issue a full refund or replacement. Customer satisfaction is our #1 priority at Renegade Products USA.
$20.00
SHOP THE SALE: TAKE UP TO 10% OFF RV Soft Starter, Exhaust, Winches & MORE
