-
MILEMARKER Mile Marker 76-50251BW SEC12(ES) Truck/SUV Element Sealed Electric Winch – 12,000 lb. Capacity, 1 Pack
About item:
The Mile Marker SEC12 -12000 lb winch for Jeeps/Trucks/SUVs has an impressive 12,000-pound pull strength allowing you to stand up to the most aggressive off-road environments. Powerful series-wound motors and rugged planetary gear sets are the backbone of this winch. With robust controls, fully sealed 400-amp solenoids and body, and an integrated kill switch, the SEC12 is an industry proven winch at an unmatched value. Built with marine grade remote control connectors and fully-sealed, submersible, water, mud, and snow proof. Each Steel Cable Version comes with a 3/8” x 100’ steel cable, a roller fairlead, the Synthetic Rope version comes with a 3/8” x 92’ synthetic rope, an anodized aluminum hawse fairlead. Both come with stainless steel hardware, a corrosive resistant body, and a handheld remote control with a 12′ cord.
Main Features:
• 4.9 HP Series Wound Motor
• Rugged Planetary Gear Sets
• Clockable Gear Housing
• Fast Line Speeds
• Submersible, 400 Amp Solenoid
• Automatic Load Holding Brake
• Corrosion Resistant Stainless Steel Fasteners
• 100’ Steel Cable Or 92’ Synthetic Rope
• Roller Fairlead (Steel Cable Version) Or Aluminum Hawse Fairlead (Synthetic Rope Version)
• Waterproof
• Handheld Remote Control.$769.99 -
MagnaFlow JK Jeep Wrangler Street Series Axle-Back Performance Exhaust System
SPECIFICATIONS
- Type
- Axle-Back
- Series
- Street
- Main Piping Diameter
- 2.5″
- Exit Style
- Dual Split Rear
- Inlet Connection Type
- Clamp-On
- Muffler Quantity
- 1
- Muffler Type
- Straight-Through
- Muffler Material
- Stainless Steel
$775.00 -
aFe Power Magnum FORCE 54-11472 BMW 335i (E90/92/93) Performance Intake System (Oiled, 5-Layer Filter)
- Outflows the factory intake by up to 98% . Produces an additional 27 horsepower and 34lbs. x ft. torque
- 5-Layer progressively finer oiled, washable cotton gauze media allows maximum airflow for maximum power
- 16 gauge, one-piece powder-coated heat shield
- Heat-insulating molded plastic tube replaces the stock intake tract
- This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
$777.95 -
Baja Designs OnX6+ 20 in. 18,460/24,920 Lumens 20 Inch LED Light Bar 452003
Description
The Baja Designs OnX6+ LED light bar is the pinnacle of off-road lighting. Integrating our trademarked high-speed spot reflectors along with our next-generation LED technology for increased performance and versatility with superior efficiency, the OnX6+ is ready to illuminate the trails or take you to the win at the Baja 1000. The OnX6+ is offered in multiple sizes ranging from 10-inch bars providing 10,817 total raw lumens to 50-inch bars that push out 39,430 total raw lumens illuminating lighting zones 1, 2, 3, 4 simultaneously while pushing into zone 5. Vertical adjustments can be made and locked in, offering the best beam pattern in front of the vehicle no matter where it is mounted. Race proven, the mil-spec aluminum housing of the OnX6+ has been designed to withstand rugged conditions that off-roaders will endure. Our exclusive MoistureBlock technology ensures the light bar remains waterproof and dustproof even in the harshest conditions. Customize your beam pattern or change damaged lenses without voiding the warranty on the OnX6+ with our uService technology. Installation of the OnX6+ is easy and comes with mounting brackets that can be used in any application. When you need an LED light bar that offers high-output LEDs with exceptional intensity, improved visibility and safety in various conditions, the OnX6+ LED light bar is the only choice for those that demand the best in lighting. Backed by our 30-Day Satisfaction Guarantee and Lifetime Limited Warranty for the ultimate in purchase protection. NOTE: Wiring harness not included. Please use 640115 = OnX6+ 10-20in. 640119 = OnX6+ 30-50in. NOTE: * 50in OnX6+ does NOT have a Hi-Lo Function, The light bar is pre-dimmed.
Satisfaction Guarantee – 30-Day Money Back Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Only LED Driven At 100 Percent
5000K Daylight – Less Driver Fatigue, Natural Color
$778.00 -
Tiger Tool – Bva Hydraulic Pump With 6 Hose & Gauge (70129)
About Item:
- Leading Manufacturer Of High-Quality Products
- International Renown For Our Diverse Range Of Award-Winning Products
- Fully Equipped With State-Of-The-Art Technology
- All Products Have Been Designed With The Professional In Mind
- Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User
$785.99 -
Grizzl-E Level 2 EV Charger, 16/24/32/40 Amp, NEMA 14-50 Plug, 24 feet Premium Cable, Indoor/Outdoor Car Charging Station (Avalanche Edition)
- Grizzl-E Avalanche Edition NEMA 14-50 Plug with 24 Feet Premium Cable is a simple, powerful, heavy-duty and portable Electric Vehicle Charging Station which is suitable for any weather. Made in Canada. Compatible with all EVs and PHEVs sold in North America.
- UL Full Tested and Certified. Eligible for the Federal Rebate Program. IP67 (Water resistant), Fire resistant. Over Current, Over Voltage , Under Voltage, Missing Diode, Ground Fault, and Over Temperature Protections. Self-Monitoring and Recovery, Power Outage Recovery. Built in GFCI.
- 3-year Warranty. Full customer support is available.
- Fast charging and adjustable amperage: 40A, 32A, 24A, 16A. Maximum current output of 40 Amps for 50A circuit breaker, 32 Amps for 40A circuit breaker, 24 Amps for 30A circuit breaker, or 16 Amps for 20A circuit breaker. Charge Rate: 28-30 miles per hour at 40A, 22-25 miles per hour at 32A, 15-18 miles per hour at 24A and 10-12 miles per hour at 16A.
- Easy to install and use. Save hundreds of dollars on installation – just install a simple 14-50R outlet and you are ready to plug in your Grizzl-E. Easily transportable. Simple to remove from the mounting bracket and transport between different locations. NEMA-4 water and air tight metal enclosure. More power and output configurations for your money than any other charging station.
$789.00 -
Pacbrake HP20327-QM Dual Channel (2nd Generation) Wirelesss Air Spring Controls (Quick Mount)
About Item:
- Dual Path Control – adjust your air springs independantly to adjust for uneven loads.
- 3x Signal Strength – gone are any frustrations associated with connecting phone and controller.
- Waterproof and debris resistant – Demand a Pacbrake IP67 rated controller.
- Quick Mount Kit – comes with Quick Mount bracket for effortless bolt-on installation.
- Military grade solenoids – designed to withstand extreme cold, heat, moisture or salt spray.
- Ultra Easy Connections– Pre-installed push-to-connect air fittings and pre-assembled wiring connectors reduces installation time to under an hour!
- Works in the Backcountry – strong bluetooth connection; does not require cellular service to operate.
$789.99 -
1345-52-02 Truck Rack, Compact
Outfit a compact truck bed with the WEATHER GUARD Model 1345-52-02 steel truck rack to carry longer ladders and materials to the jobsite. With a weight rating of 1,000 pounds, this ladder rack instantly extends the storage and hauling capabilities of any truck.
Mounting Method: No-Drill ClampApprox. Product Length (in): 127.82Approx. Product Width (in): 66.25$794.00 -
Weather Guard 1275-52-02 Full Size Steel Truck Rack
SKU: WTG12755202Manufacturer: Weather GuardMaterial: SteelCapacity: 1000 lbs.Dimensions: 154 1/10 in. L x 72 7/10 in. W x 35 9/10 in. HWeight: 160.50 LBSUPC: 783965055895$798.00 -
Sequential LED Headlights compatible with Ford Mustang 2018-2023 (pair)
About Item:
Brand Form Lighting Color White Specific Uses For Product Head Lights Vehicle Service Type Car Year 2022 Special Feature High Beam Lens Color Amber Item dimensions L x W x H 23.5 x 12 x 21.5 inches Manufacturer Form Lighting - STAND OUT FROM THE CROWD – Give your Mustang a more aggressive modern appearance with Form Lighting’s Sequential LED Headlights. Elevate your frontend with a triple bi-LED projector, sequential turn signals, startup sequence, and LED running light, all compatible with Ford, Mustang 2018-2023.
- IMPROVED VISIBILITY – These headlights are equipped with a bi-LED main projector, which provides increased output, with a sharp cutoff, excellent center intensity, and strong width to illuminate the road ahead. There are also two extra LED reflectors for the high beam. These reflectors throw additional light far down the road for excellent high beam performance.
- SEQUENTIAL TURN SIGNAL – These headlights also feature an integrated sequential LED turn signal. Every time the turn signal is activated, amber LEDs sweep across the bottom of the lamp in a smooth, chasing sequence. When you’re finished making your turn, they automatically “switch back” to the bright white DRL.
- STARTUP WELCOME SEQUENCE – These headlights are packed with the latest and most modern lighting functions, including a startup or “welcome” sequence. Anytime the running lights turn on, they will illuminate in a two-stage chasing sequence that is sure to turn heads, with an ultra-premium look.
- SIMPLE PLUG-AND-PLAY INSTALLATION – Our headlights for the Mustang are plug-and play for the main functions, along with a single wire tap if you’d like to enable the sequential turn signal feature. They were designed to plug into your factory headlight connector, and they fit perfectly without any gaps. No errors, flickering, or hyperflashing!
$799.00













