-
Lucas Oil Products 10095 SAE 50 Plus Racing Motor Oil/1×1/5 Gallon Pail
About this item
Liquid Volume
160 Fluid Ounces
Package Information
Bottle- Product Type: Auto Accessory
- Package Quantity: 1
- Package Weight: 40.2 lbs
- Country Of Origin: China
$139.49 -
Lucas Oil Products 10631 Engine Oil/3×1/5 Quart
About this item
-
Brand Lucas Oil Liquid Volume
160 Fluid OuncesPackage Information
Bottle
$35.49 -
-
Lucas Oil Synthetic SAE 20W-50 Racing Engine Oil/3×1/5 Quart
About this item
Viscosity 20W 50 sae_grade Brand Lucas Oil Liquid Volume
160 Fluid OuncesPackage Information
Bottle- High Zinc Fortified
- Less Drag For More Horsepower!
- Compatible With Methanol or Racing Gas
$78.99 -
Mads Smarty POD Tuner – S-06
About this item
- CaTCHER software’s inside
- Ten different performance levels
- Fastest download in the industry, up to three times faster than the competition, a typical ECM update takes about 3.5 to 5 minutes
- ABS tire height updates in just few seconds
- Not traceable in the stock setting. Smarty leaves no footprint.
- Manual High Idle is enabled in all softwares
- Reads Diagnostic Trouble Codes in plain text
- No tools required, no fuses to pull
- USB built in for simple updates
- Free internet updates
- Most complete keyboard in the industry
- Reliable, it works off your OEM hardware
- Programmable Speed Limiter from 25 to 250 mph
- Programmable parameters for fine tuning
- Power on Demand
-
Brand Smarty Part Number S-06
$685.00 -
Mads Smarty SSR Tuner – SSR59
About this item
Product Name: Mads Smarty SSR Tuner
Manufacturer: Mads Smarty
Manufacturer Part #: SSR
Thoroughbred Diesel Part #: SMASSR59
Fitment Notes: Mads Smarty SSR Tuner – 03-07 Dodge Cummins 5.9L$735.00 -
MADS SMARTY TOUCH COMMOD COMMUNICATION MODULE 10-18 RAM 6.7L CUMMINS – COMMOD
About this item
- Unlocks ECM
- Enables Shift-On-The-Fly
- Works With Smarty Touch
-
Brand Smarty Part Number COMMOD Product Code Programmers & Tuners
$209.00 -
Mads Smarty Tuner – S-03
About this item
- CaTCHER software modules.
- Ten different performance levels.
- Fastest download in the industry, a typical ECM update takes just two minutes.
- ABS tire height updates in just seconds.
- Not traceable by the dealer in the stock setting. Smarty leaves no footprint.
- Cold weather 3 Cylinder High Idle is enabled in all software.
-
Brand Smarty Part Number S-03
$645.00 -
Mainline Carb. System With 10Lb Bottle
About item:
If you are a serious nitrous junkie on a tight budget we have what you have been waiting for! NX introduces MainLine Nitrous Systems. MainLine Systems benefit from the years of research and development that made Nitrous Express the leader in the nitrous world, but at a price even the most budget-restricted racer can afford. Just the basics, no frills, just rock solid performance at rock bottom prices. The ML1000 will outperform any other 250HP carbureted kit on the market, guaranteed to make 250HP. Most of it s competitors promise 250HP but only produce 160WHP!
Includes:
- 10lb Nitrous Bottle with Standard Brass Valve
- Jetting for 100, 150, 200, 250HP
- Stainless Steel Bottle Brackets
- NX Mainline Nitrous Plate
- Stainless steel hardlines for solenoid mounting
- Mainline .078 orifice nitrous solenoid
- Mainline .112 orifice fuel solenoid
- 4AN stainless steel braided feedline
$524.31 -
Mainline EFI Single Nozzle System With 10Lb Bottle
About item:
If you are a serious nitrous junkie on a tight budget we have what you have been waiting for! NX introduces MainLine Nitrous Systems. MainLine Systems benefit from the years of research and development that made Nitrous Express the leader in the nitrous world, but at a price even the most budget-restricted racer can afford. Just the basics, no frills, just rock solid performance at rock bottom prices.
Includes:
- 10lb Nitrous Bottle with Standard Brass Valve
- Jetting for 50, 100, 150HP
- Stainless Steel Bottle Brackets
- NX Piranha Nozzle
- Stainless braided nitrous and fuel lines
- Mainline .078 orifice nitrous solenoid
- Mainline .112 orifice fuel solenoid
- 4AN stainless steel braided feedline
If you have an aftermarket engine management system that is capable of adding nitrous enrichment fuel and want this system DRY (no fuel components), please call us at (940) 767-7694.
$524.91 -
Maximizer 6 Progressive Controller
About item:
- The Maximizer 6 features many safety features that help you push your tune-up further while protecting your engine from damage.
The Maximizer 6 progressive nitrous controller operates up to four separate stages of nitrous based on either time, RPM, MPH, throttle percentage or boost pressure. Whether your engine is naturally aspirated or forced induction, gasoline or diesel, the Maximizer 6 is the first choice.
Safety Features
The Max 6 monitors throttle percentage, engine rpms, nitrous PSI, boost or pan vacuum as well as 3 other user defined sensors to ensure that your engine is in the correct state to accept nitrous. If the Max 6 detects any condition that is outside the safe range, the Max 6 will shut down or pull back nitrous flow to protect your engine from any damage.
$617.27 - The Maximizer 6 features many safety features that help you push your tune-up further while protecting your engine from damage.
-
Maximizer EZ Progressive Nitrous Controller
About item:
The NX Maximizer EZ Progressive Nitrous Controller is easy to install and easy to tune making it easy to go fast.
The Max EZ was designed to replace the relay in your NX nitrous system so installation time is less than 30 seconds! Simply unplug your existing NX relay and plug the proprietary Max EZ male plug into your NX relay harness (if your nitrous system does not have a standard NX relay harness, use the included NX relay harness to complete the installation).
The Max EZ pulses your nitrous and fuel solenoids to smoothly ramp in your nitrous power resulting in increased traction and less strain on your vehicles drivetrain. The progression ramp automatically starts at 20% and ends at 100% when you push the accelerator pedal to W.O.T. (Wide Open Throttle). Ramp time is adjustable from 0 to 4.5 seconds via a simple turn screw. We recommend selecting the lowest ramp time possible without introducing tire spin. If tire spin is noticed, simply increase the ramp time to slow down the ramp to full power.
The Max EZ is capable of powering nitrous and fuel solenoids with a total amp draw up to 40 amps maximum making it the perfect choice for most plate and single nozzle nitrous systems. Consult your nitrous system manufacturer for your solenoids amp draw.
- Large-frame winch architecture mounts feet forward
- Waterproof contactor control for the ultimate in reliable electronics
- Powerful, efficient series-wound motor
- Durable, smooth three-stage planetary gear train
- Best-in-class cone brake
$159.57 -
McGard 24157 Chrome Wheel Lock Set, Cone Seat, M12x1.5 Thread, 13/16 Key Hex
About Item:
Brand McGard Special Feature Unique Key Pattern, Extra Narrow Pattern Groove Lock Type Pin Tumbler Item dimensions L x W x H 7.5 x 6 x 1.5 inches Material Aluminum,Chrome,Nickel,Steel - McGard wheel locks are manufactured in the USA to meet or exceed Original Equipment Manufacturer (O.E.M.) standards for safety and durability.
- McGard is the major supplier of wheel locks to Automotive O.E.M.’s in domestic and overseas markets, currently selling to over 30 Car Lines around the world.
$33.85 -
MCGARD 25257 Chrome Tuner Style Cone Seat Wheel Locks (M12 x 1.5 Thread Size) – Set of 4
About Item:
- Seat Style Cone Seat Nut; Thread Size M12 x 1.5; Overall Length 1.24; Hex Size 13/16; Includes 4 Locks & 1 Key. For aluminum wheels only
- Tuner Cone Seat wheel locks are a no-compromise design engineered to fit into close tolerance lug hole recesses in Tuner style wheels. Weight matched to our SplineDrive lug nuts. For alloy wheels only. Set Includes Tuner wheel locks and 1 Unique key
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
- Please note that tuner wheel locks are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your tuner wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts
- Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by the factory or dealership.
$54.01
SHOP THE SALE: TAKE UP TO 10% OFF RV Soft Starter, Exhaust, Winches & MORE
